適用于?；u及其它墻地面磚貼磚時的背面前處理，能有效提高瓷磚與粘結材料之間的粘結強度，解決貼磚會常見的空鼓、脫落問題，對低吸水率、質地致密、表面光滑的石材也有同樣效果 。拋光磚、通體磚、釉面磚、 ?；u、防滑磚、古建磚、馬賽克、大理石、花崗巖、石灰巖、板巖等高密度磚石背面的涂刷。
Applicable to the back pretreatment of vitrified bricks and other wall and floor tiles, which can effectively improve the bond strength between the tiles and the bonding materials, solve the common hollowing and falling off problems of the tiles, and have low water absorption rate. Stones with a dense texture and a smooth surface have the same effect. Brushing the back of high-density masonry such as polished tiles, whole bricks, glazed tiles, vitrified tiles, non-slip tiles, ancient bricks, mosaics, marble, granite, limestone, slate.
1: Enhance the adhesion of the substrate 2: Simple construction, green products
3: Reduce the empty drum rate 4: Waterproof, mildewproof, anti-aging, high and low temperature resistant
1. Clean the back of the tile and keep it clean, free of dust, oil, and loose matter.
2. Apply the product directly to the back of the tile with a roller.
3. Place the tile after painting to make the glue liquid become transparent (to prevent the slurry from being squeezed when pasting), and then use Tile glue or paste mortar tile can effectively improve the paste ability of the tile and reduce its empty drum rate.
1. The construction temperature should be 5C-35C;
2. The painted tiles should be pasted before final setting;
3. This product does not need to add water, open the barrel and mix it evenly, and use it directly to avoid rainy days.
4. In order to ensure the thermal expansion and contraction between the tile and the substrate, it is required to stick the seam. The brick joint of the exterior wall tile shall not be less than 1.5MM
5. The company is not responsible for any quality accidents caused by construction operation errors or failure to follow the product specifications.
The original sealed product is stored in a dry and cool environment. Under normal conditions of storage and transportation, the shelf life of the product is one years.